• Analysis of post-graduate theses in Industrial Engineering area of Turkish Universities 

  Cetinkaya, Cihan; Uslu, Aysenur; Ozceylan, Eren; Hayirsoz, Kaan Mert (2020)

  Today, engineers make efforts for post-graduate programs far more than before. The main reasons can be increasing awareness of firms about education, decreasing job opportunities for undergraduate degrees, the increasing ...

• Warehouse Location selection for an electricity distribution company by KEMIRA-M method 

  Kis, Oznil; Can, Gulin Feryal; Toktas, Pelin (2020)

  In this study, by using Modified Kemeny Median Indicator Ranks Accordance (KEMIRA-M) approach which begins to become popular in recent times for solution of Multi criteria Decision Making (MCDM) problems, warehouse location ...

• A Multi-Objective Credit Evaluation Model Using MOORA Method and Goal Programming 

  Ic, Yusuf Tansel (2020)

  The selection process of a suitable credit applicant firm becomes a more complex decision making process as the decision makers in the banking industries have to assess a wide range of firms based on a set of conflicting ...

• Airfoil-slat arrangement model design for wind turbines in fuzzy environment 

  Atalay, Kumru Didem; Dengiz, Berna; Yavuz, Tahir; Koc, Emre; Ic, Yusuf Tansel (2020)

  In this study, a multi-element wind turbine blade that consists of NACA 6411 and NACA 4412 leading-edge slat design is investigated computationally. Optimum design parameters of the slatted wind turbine blade leading to ...

• Analysis of the effect of the number of criteria and alternatives on the ranking results in applications of the multi criteria decision making approaches in machining center selection problems 

  Ic, Yusuf Tansel; Yurdakul, Mustafa (2020)

  Multi criteria machining center selection models are widely used in the literature. In the applications of multi-criteria decision making models, machining center selection criteria are directly taken from catalogues. It ...

• Heart sound recording and automatic S1-S2 waves detecting system design 

  Aksahin, Mehmet Feyzi; Oltu, Burcu; Karaca, Busra Kubra (2020)

  The second leading cause of death in the world is cardiovascular diseases. Diagnosis of vast majority of cardiovascular diseases is made by listening to heart sounds by specialists (auscultation method). However, since the ...

• Freshness Classification of Horse Mackerels with E-Nose System Using Hybrid Binary Decision Tree Structure 

  Guney, Selda; Atasoy, Ayten (2020)

  The aim of this study is to test the freshness of horse mackerels by using a low cost electronic nose system composed of eight different metal oxide sensors. The process of freshness evaluation covers a seals of seven ...

• Predicting Infections Using Computational Intelligence - A Systematic Review 

  Baldominos, Alejandro; Puello, Adrian; Ogul, Hasan; Asuroglu, Tunc; Colomo-Palacios, Ricardo (2020)

  Infections encompass a set of medical conditions of very diverse kinds that can pose a significant risk to health, and even death. As with many other diseases, early diagnosis can help to provide patients with proper care ...

• Quantitative sleep EEG synchronization analysis for automatic arousals detection 

  Erdamar, Aykut; Aksahin, Mehmet Feyzi (2020)

  Background and objective: Electroencephalographic arousals are considered to be the main reason for the interruption of sleep and are visually examined by sleep physicians. Visual scoring of all-night recordings has ...

• Cross-exchange of donor units in donor-acceptor-donor type conjugated molecules: Effect of symmetrical and unsymmetrical linkage on the electrochemical and optical properties 

  Eroglu, Deniz; Ergun, Emine Gul Cansu; Onal, Ahmet M. (2020)

  A series of donor-acceptor-donor type molecules were synthesized using carbazole (C) and thiophene (T) as donor units. The donors were connected symmetrically and unsymmetrically to the acceptor unit of benzothiadiazole ...

• A benzimidazole-based turn-off fluorescent sensor for selective detection of mercury (II) 

  Ergun, Emine Gul Cansu; Ertas, Gulay; Eroglu, Deniz (2020)

  In this study, potential fluorescent sensing ability of a donor-acceptor-donor type conjugated molecule over various metal ions (Ni(II), Zn(II), Cu(II), Cd(II), Pb(II), Fe(II), Fe(III), As(III), Se(IV), Hg(I) and Hg(II)) ...

• On a Problem of Erdos and Graham 

  Yildiz, Burak; Gurel, Erhan (2020)

  An old conjecture of Erdos and Graham states that only finitely many integer squares could be obtained from product of disjoint blocks of consecutive integers of length greater than or equal to four. It is known by ...

• Influence of Sulfurization Time on the Properties of Cu2ZnSnS4 Thin Films Deposited on Mo-coated Soda Lime Glass Substrates by Co-sputtering Technique 

  Akcay, N.; Ataser, T.; Ozen, Y.; Ozcelik, S. (2020)

  In this work, Cu2ZnSnS4 (CZTS) absorber films were prepared by sulfurization of co-sputtered precursor films at different time periods. The influence of sulfurization time on physical characteristics of the grown films was ...

• Shadow and quasinormal modes of a rotating loop quantum black hole 

  Liu, Cheng; Zhu, Tao; Wu, Qiang; Jusufi, Kimet; Jamil, Mubasher; Azreg-Ainou, Mustapha; Wang, Anzhong (2020)

  In this paper, we construct an effective rotating loop quantum black hole (LQBH) solution, starting from the spherical symmetric LQBH by applying the Newman-Janis algorithm modified by Azreg-Ainou's noncomplexification ...

• Improving the rapid office strain assessment method with an integrated multi-criteria decision making approach 

  Delice, Elif Kilic; Can, Gulin Feryal; Kahya, Emin (2020)

  Nowadays, work-related musculoskeletal disorders (WMDs) are gradually increasing. This not only reduces work efficiency but also negatively affects workers' health. For this reason, it is important to design the working ...

• Cylindrically symmetric static n-dimensional (un)charged (anti-)de Sitter black holes in generic f(T) gravity 

  Azreg-Ainou, Mustapha (2020)

  Given a generic function f(T) we construct in closed forms cylindrically symmetric static n-dimensional uncharged and charged de Sitter and anti-de Sitter solutions (including black holes, wormholes and possibly other ...

• Development of an intuitionistic fuzzy ranking model for nontraditional machining processes 

  Yurdakul, Mustafa; Ic, Yusuf Tansel; Atalay, Kumru Didem (2020)

  Nontraditional machining processes (NTMPs) are capable of processing very small parts, producing intricate geometries, operating on very narrow machining areas and machining high strength materials. These capabilities lead ...

• GIS-based evaluation of the speed limit increase on urban arterial traffic safety in Ankara 

  Kibar, Funda Ture; Tuydes-Yaman, Hediye (2020)

  Setting safe speed limit is very critical and complex phenomenon, which has to be decided based on the road hierarchy that categorizes roads according to their functions and capacities, and poses certain restrictions in ...

• Ballistic performance of unidirectionally oriented carbon fiber reinforced composite armor with high-velocity impact 

  Kacan, Yelda O.; Elaldi, Faruk (2020)

  For the last few decades, composite materials have been more popular than other conventional metal materials in the aircraft industry. Having better mechanical properties (strength, fatigue life, impact strength, corrosion ...

• The Effects of Polymer Coating of Gold Nanoparticles on Oxidative Stress and DNA Damage 

  Sen, Gamze Tilbe; Ozkemahli, Gizem; Shahbazi, Reza; Erkekoglu, Pinar; Ulubayram, Kezban; Kocer-Gumusel, Belma (2020)

  Gold nanoparticles (AuNPs) have been widely used in many biological and biomedical applications. In this regard, their surface modification is of paramount importance in order to increase their cellular uptake, delivery ...

View more