Plastik enjeksiyon yöntemiyle üretilen farklı oranlarda cam fiber takviyeli polimerlerin mekanik özelliklerinin incelenmesi
Özet
Plastik enjeksiyon yöntemi polimerler ve kompozit malzemeler için önemli bir üretim
metodudur. Plastik enjeksiyon sırasında üretim parametrelerinin ve kompozitteki fiber
oranının mekanik özellikler üzerinde etkisi önemlidir. Bu çalışmada, plastik enjeksiyon
parametrelerinin ve cam fiber oranının cam fiber takviyeli poliamidin çekme, eğilme ve
darbe dayanımları üzerindeki etkileri araştırılmıştır. Bu kapsamda, poliamid içinde %15,
%20 ve %30 cam fiber içeren kompozit numuneler üretilmiştir. Enjeksiyon parametreleri
olarak enjeksiyon basıncı ve erime sıcaklığı seçilmiştir. Sonuç olarak, kompozitteki cam
fiber miktarının artmasıyla çekme, darbe ve eğilme dayanımları artmıştır. Ayrıca üretim
parametrelerinden basıncın yüksek olduğu üretimde sıcaklığın arttırılması çekme
dayanımını azaltırken basınç düşükken üretilen numunelerde yüksek sıcaklık yüksek
çekme dayanımı ile sonuçlanmıştır. Plastic injection method is an important production method for polymers and composite
materials. The effects of production parameters during plastic injection and the amount of
fiber in the composite on mechanical properties are important. The effects of plastic
injection parameters and the ratio of fiber in composite on the tensile, bending and impact
strength of fiber reinforced polyamide were investigated. Composite samples with 15%,
20% and 30% glass fiber were prepared within this concept. Injection pressure, and
melting temperature were selected as injection parameters. In conclusion, the tensile,
impact and bending strength were increased by increasing the amount of glass fiber in the
composite. In addition, increasing the temperature that is one of the manufacturing process
parameters when the pressure is high during injection whereas high injection temperature
results in high tensile strength in the samples produced at low pressure.